Garland SunFire Series X60-10RR 10 Burner Sunfire Restaurant Range with Two Standard Ovens

Garland

Compare

Gas restaurant series range with 2 standard size Sunfire ovens. 59-1/16″ (1500mm) wide with a 27″ (686mm) deep work top surface. Stainless steel front, sides and 4″(102mm) wide front rail. 6″ (152mm) legs with adjustable feet. Ten robust 2 piece 30,000 Btuh/8.797 kW (Natural gas), cast open burners set in split cast iron ergonomic grates. Griddle on applicable models with cast iron “H” style burners, 18,000 Btuh/5.27 kW (natural gas), in lieu of open burners. Porcelain oven bottom and door liner. Two position fixed rack guide w/one oven rack. Heavy duty oven door with “keep cool” door handle. Straight steel tube oven burner 33,000 Btuh/9.67 kW (natural gas) provides quality bake and good recovery. Oven thermostat ranges from Low to 500° F (260° C). Available with open storage base in lieu of oven on 24 inch griddle model. Gas input ratings shown for installations up to 2000 ft.,(610m) above sea level. Please specify altitudes over 2000 ft. Note: Installation clearance reductions are applicable only where local codes permit. This product is not approved for residential use. NOTE: Ranges supplied with casters must be installed with an approved restraining device.

This top-quality Garland US Range X60-10RR Sunfire Restaurant Range will help save space in the kitchen, ultimately allowing you to cook more at once. This 10-burner Garland US Range X60-10RR Sunfire Restaurant Range runs on gas and uses lp, ng gas. This range’s exterior finish is stainless steel front and sides. This range is 57 inches tall, 59.06 inches wide, and 33.50 inches deep.

2,350,000.00

Sunfire® Restaurant Range, gas, 60″, (10) 30,000 BTU open burners, with cast iron top & ring grates, (2) standard oven with 2 position rack guides with oven rack each, stainless steel front, sides, plate rail, backguard, & high shelf, 6″ steel core legs, 366,000 BTU, NSF, CSA

Standard Features:
  • Pressure regulator, 1″ NPT
  • Stainless steel front and sides
  • Durable easy to read control knobs
  • Stainless steel 4″ (102mm) plate rail
  • Large 27″ (686mm) work top surface
  • Easy to clean 6″ (152mm) steel core, injection molded legs
  • 12″ (305mm) section stamped drip trays w/ dimpled bottom
  • Stainless steel backguard w/ removable stainless steel shelf

Standard on Applicable Models:

  • 4-1/4″ (108mm) wide grease trough
  • Ergonomic split cast iron top ring grates
  • Heavy duty oven door w/ keep-cool handle
  • Oven thermostat w/ Low to 500° F (260° C)
  • Griddle plates only available on right side of range
  • Straight steel tube oven burner 33,000 Btuh/9.67 kW
  • Nickel plated oven rack with two fixed position oven rack guides
  • 5/8″ (15mm) thick steel griddle plate w/manual hi/lo valve control
  • 30,000 Btuh/ 8.79 kW 2 piece cast iron “Q” style donut open burner
  • Open storage base in lieu of one oven, models X-60-10RS & X60-6G24RS
  • 18,000 Btuh/5.27 kW cast iron “H” style griddle burner per 12″(305mm) width of griddle
  • Standard size Sunfire oven with ribbed porcelain oven bottom and door interior, aluminized top, sides and back; RR models 2 ovens, RS models one oven

Optional Features:

  • Additional oven racks
  • Celsius temperature dials
  • 6” (152mm) swivel casters (4), with front locking
  • Low profile 9-3/8″” (238mm) backguard stainless steel front and sides

Specifications:
Gas restaurant series range with 2 standard size Sunfire ovens. 59-1/16″ (1500mm) wide with a 27″ (686mm) deep work top surface. Stainless steel front, sides and 4″(102mm) wide front rail. 6″ (152mm) legs with adjustable feet. Ten robust 2 piece 30,000 Btuh/8.797 kW (Natural gas), cast open burners set in split cast iron ergonomic grates. Griddle on applicable models with cast iron “H” style burners, 18,000 Btuh/5.27 kW (natural gas), in lieu of open burners. Porcelain oven bottom and door liner. Two position fixed rack guide w/one oven rack. Heavy duty oven door with “keep cool” door handle. Straight steel tube oven burner 33,000 Btuh/9.67 kW (natural gas) provides quality bake and good recovery. Oven thermostat ranges from Low to 500° F (260° C). Available with open storage base in lieu of oven on 24 inch griddle model. Gas input ratings shown for installations up to 2000 ft.,(610m) above sea level. Please specify altitudes over 2000 ft. Note: Installation clearance reductions are applicable only where local codes permit. This product is not approved for residential use. NOTE: Ranges supplied with casters must be installed with an approved restraining device.

This top-quality Garland US Range X60-10RR Sunfire Restaurant Range will help save space in the kitchen, ultimately allowing you to cook more at once. This 10-burner Garland US Range X60-10RR Sunfire Restaurant Range runs on gas and uses lp, ng gas. This range’s exterior finish is stainless steel front and sides. This range is 57 inches tall, 59.06 inches wide, and 33.50 inches deep.
SKU: 1485855 Category: Tags: ,

Specifications of Garland SunFire Series X60-10RR 10 Burner Sunfire Restaurant Range with Two Standard Ovens

Weight 120 kg
Brand

Colour

Model No.

X60-10RR

Key Features

Pressure regulator, 1" NPT
Stainless steel front and sides
Durable easy to read control knobs
Stainless steel 4" (102mm) plate rail
Large 27" (686mm) work top surface
Easy to clean 6" (152mm) steel core, injection molded legs
12" (305mm) section stamped drip trays w/ dimpled bottom
Stainless steel backguard w/ removable stainless steel shelf

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.